Quality Economical 6.5 HP OHV
Horizontal Shaft Engines
These 196cc OHV gasoline engines
feature dual bearing blocks, recoil-rope starters, 3/4"dia. keyed PTO shafts,
steel camshafts, and low oil shutoff. They are a great engine to build
into an affordable and fast karting engine, but can also serve well in any
application where your old reliable 5 HP flathead needs to be replaced.
The aftermarket billet parts ARC makes for the Honda GX160/200 will fit this
engine.
|
|
|
Box Stock
package - $165+ S&H.
6.5 HP OHV engine.
 *
|
Super X package -
$299.95+S&H. Super
X package 1 contains 6.5 HP OHV engine, With ARC model 6619 SFI certified billet
flywheel and an ARC model 6266 billet rod.
* |
*Not for sale outside the continental USA, or in CA for anything other than competition purposes. ARC recommends that an SFI certified billet flywheel be used on ANY engine being raced. Engines will only be shipped via UPS ground.
The Finest Racing Connecting Rods
Click Here for Connecting
Rod Installation Instructions!
|
|
|
|
59 Variations and counting to fit your needs!
The ONLY SFI approved
Flywheels Available
for Karting, Jr. Dragracing, & Lawnmower Racing!
With
and without the Adjustable Timing Hub!
With and without fins.
Available for all kinds of Small Engines.
New!
Now Available!!!!
Briggs model
19 & 28 Vertical Shaft Engines
Vanguard & Intek V-Twins
Honda GX200
Yamaha YF200R1
The
Strongest Crankshaft available...period!
New!
Splined PTO Crankshaft for Jr Dragsters!
7/8" and 1" dia.
Journal Stroker models
available
with unparalleled Quality and
Precision
New!
Now Available!!!!
Stock Stroke Billet Crankshaft
(replaces Stock Briggs Raptor Models)
This crankshaft also is used as a stroker model
for The B&S Animal or Intek 190/206 Engines
Keeps Oil Clean and in the Engine!
Model
6044 ARC CVS for your control
stock/outlaw/stock appearing
Raptor Engine.
Available for Raptor, Animal, BlockZilla,
and
Tecumseh Star blocks in Kart
and Dragster Models.
Tapered
roller bearing hubs
for 3/4"- 5/8" tapered spindles found
on newer Prowler and Phantom Chassis!
Available for 5/8" straight spindles too!
NEW! JAZ PRODUCTS MINI BREATHER CATCH CAN
ONE PINT CAPACITY
$48.95
Copyright © 1998-2005 Amundsen Research Corp. All rights
reserved
Last
update: May 01, 2008
