Product Description
Fits only the Gen1 and Gen3 NON HEMI Harbor Freight Predator 212cc. The ARC 6058 sidecover features side by side dual ball bearings that support the crank and gives it another fulcrum point to help eliminate any crankshaft flexing. It has an integral o-ring along the perimeter in it's machined groove that guarantees a good seal. 4 pin receptacles mate with 4 dowels to increase mating shear strength. Bronze bushing(with ARC's advanced oil system) support for camshaft main increases strength and minimizes potential for wear. It has 2 venting holes at the top with 1/8" NPT Plugs. It also has 2 oil fill ports with billet ARC aluminum hand tighten plugs. Another useful feature is the threaded holes over the side dowel -pins so that small bolts (included) can be used to push the side cover for easy removal. Not compatible with electric start engines. Chain guard mounting hole thread size M8X1.25mm.
* Includes: Bearings, Seal, Gasket, O-Ring, Plugs and caps and installation hardware.
***Bolt torque is 185-200 inch/lbs***
***use 14oz oil in most applications***
***Will come with 2 solid dowels to use in the top and bottom dowel receptacles. Must use the 2 OEM dowels in the left and right dowel receptacles***
* Important * Due to variations in blocks, you may find that the side cover is not quite lining up with all four dowel pins. Try removing the bottom dowel pin if you encounter difficulty. Contact our tech department if you have any problems.
WILL NOT FIT the Honda GX200/Clone 196cc, Ducar 196/212/224cc, Tillotson 196/212/225/235, Predator 212 Hemi, Predator Ghost or Predator 224cc engines
Will Not work with studs. Must use the bolts that come in the kit
Product Videos
Custom Field
Product Reviews
3 Reviews Hide Reviews Show Reviews
-
Very well made piece, I would recommend this to anyone interested in building high performance engines.
Can’t say enough about the quality machining and very fast delivery! I wish every company operated like you all.
-
billet side cover
This 6058 billet side is the best side cover out there. It is quality made and fits perfect on a non-hemi engine. The only thing i found wrong was it will not fit a honda or clone or predator engine with a starter attached to engine . The top oil plug is just slightly in the way so you will have to remove your starter. Other than that this billet side cover is a nice addition to your engine , helps alot with crank flex. Glad i purchased one.
-
6058 Sidecover
Great product, flawless machining, perfect fit. A great reliability upgrade everyone should use!