DJ-2225 Race Ready/CNC Bored Box Stock Carb.

Our "615" Box Stock class carb.  Airflow has been significantly increased by opening and reshaping the Venturi using a CNC machine - the same technology we use to bore our connecting rods.  The fuel circuit is set to where we run them ourselves so you can bolt this to your box stock engine and run it immediately knowing that you aren't getting beat with carburetor.  Will pass box stock tech.

You will need to set your engine to idle at approximately 2000 RPM by adjusting the large phillips head plastic idle speed adjustment screw.

We jet these carbs specific to your application.  Please select which air filter configuration you are using and which header configuration you are using and your type of racing from the drop-down boxes so we can customize your carb to match your needs.