APPROVED FOR AKRA/NKA BOX STOCK CLASS
SFI certified billet aluminum flywheel for Honda GX160, GX200, & 196cc Clone.
The keyway is fixed and the stock pull starter can be used.
Weighs 3.5lbs and has a special designed high-power magnet that creates a spark that is hotter and lasts longer, getting the most power from every drop of fuel.
Flywheel is set at 32 degrees BTDC with a stock key.
Minimum coil gap .030. Torque to 65 ft/lbs
This flywheel is made for the GX200 and 196cc Clones, NOT for Predator Engine (Shaft taper is not same).