Billet Oil Fill Cap w/ o-ring Fits ALL ARC Billet sidecovers. Threaded 3/4"X 10.
***WILL NOT FIT CLONE OR PREDATOR SIDECOVERS***
Pulse Inlet Fitting
These fittings go in the clone valve cover in order to pulse the fuel pump. We sell the valve cover with the fitting already installed as well.
Straight Air Filter. 3-1/2" x 4" x 2-7/16" flange diameter.
The standard angled air filter used in most 4 cycle karting engines. 3-1/2" x 4" with a 20 degree angle. The inside diameter of the mounting flange is 2-7/16". Most OHV kart engines will require an angled air filter!
COLOR MAY VARY.
Heavy Duty starter motor for Briggs Intek V-twin, Vanguard V-twin, and Model 28/31Our 6611 series flywheels often need, or require the use of this starter on specific high-performance racing engines with compression ratios higher than stock.
The strongest header clamp available. If you are tired of your header coming loose or stripping out the threads on the aluminum clamps, this is your answer. Fits RLV#4104 B91XL(stock) and RLV#4106 B91MO(modified) mufflers for 1 5/16" headers
Stock Gaskets, Carb/Intake for Tillotson Carb (HL-334WX)
Tillotson Air Filter Adapter
EC Tillotson 4_Cycle Gas Carburetor.790 Venturi X 1.005 Throttle Bore.790 Bore Gasoline Only
HL-334WX Carburetor was design by EC about 2004 for small OHV 4 cycle engines, where a smaller venturi carburetor would be needed. This carburetor was...
Plastic Fuel Strainer Cap for the Tillotson Carburetor. Color may vary.
Linkage Kit for the HL- 334WX Tillotson Carburator--Single Stack
Muffler; Open MOD 1-5/16" I.D. More open, allows more exhaust flow than the DJ-1139