BSP & Clone

DJ-2235V Carb Insulator w/vac Takeoff

Carb Insulator w/vac Takeoff

DJ-1250H GX200 4 Hole Carb Nozzle Jet

GX200 4 Hole Carb Nozzle Jet

DJ-1293-05 Total Seal Rings Low Tension +.005 196cc

These 68.125mm rings are made using only the highest quality materials, the tightest tolerances, and under the strictest quality control procedures during production to develop the most consistent low tension ring set money can buy. The rings are lapped...

DJ-1293 Total Seal Rings Low Tension STD 196CC 68MM

These 196cc(68mm) rings are made using only the highest quality materials, the tightest tolerances, and under the strictest quality control procedures during production to develop the most consistent low tension ring set money can buy. The rings are...

DJ-1071S Slotted Push Rod Guide Plate

 Slotted Push Rod Guide Plate

DJ-1045UL Exhaust Spring Ultralite Retainer

 Exhaust Spring Ultralite Retainer. NOT RECOMMENDED FOR SPRINGS OVER 10.8LBS

DJ-1040UL Intake Spring Ultralite Retainer

 Intake Spring Ultralite Retainer. NOT RECOMMENDED FOR SPRINGS OVER 10.8LBS

DJ-1200B BSP / Clone Blower Housing

DJ-1190B 6.5 Hp OHV Black Clone Starter Recoil Assembly

DJ-1130B BSP / Clone Valve Cover

DJ-1320 Carb to Intake Gasket (For Plate)

This OEM gasket for the BSP/Clone engine goes between the stock carburetor and the black intake insulator. An extra gasket is needed if a restrictor plate is used. These are good quality and dependable and priced so that anyone can keep a few extras on...

DJ-1305 BSP/Clone Gasket Kit

This kit includes the following: DJ-1320 Carb to intake insulator gasket DJ-1325 Intake insulator to head gasket DJ-1330 Header gasket DJ-1335 Valve cover gasket DJ-1340 Side cover gasket DJ-1315 Air box to carb spacerDJ-1310 Head gasket(...