Created with Sketch. Created with Sketch.

Carb & Intake

  • 6877 Pulse Inlet Fitting

    Pulse Inlet Fitting These fittings go in the clone valve cover in order to pulse the fuel pump. We sell the valve cover with the fitting already installed as well.

    $2.00
    Add to Cart
  • 6878 ARC Carb. Adapter GX390 to GX200

    Introducing ARC's NEW  Carb Adapter. Allows Racer to Use a GX390 Carburetor on a GX200/BSP/Clone Engine  Important   Remove the OEM Black Plastic Insulator (DJ-1235) in order to use this Adapter. One side...

    $18.00
    Add to Cart
  • 6899 Angled Air Filter

    The standard angled air filter used in most 4 cycle karting engines. 3-1/2" x 4" with a 20 degree angle. The inside diameter of the mounting flange is 2-7/16". Most OHV kart engines will require an angled air filter! COLOR MAY VARY.

    $8.00
    Add to Cart
  • 6926 Air Filter Adapter Clone/GX200

    Our economy air filter adapter. Made to fit Honda/Clone Gx200, and Predator engines. If used on a Predator, you will need to replace your short carb stud with a standard one. Carb stud is part number DJ-1345. 

    $9.95
    Out of stock
  • 6926B Box Stock Black Air Filter Adapter

    Our economy black air filter adapter. Made to fit Honda/Clone Gx200, and Predator engines. If used on a Predator, you will need to replace your short carb stud with a standard one. Carb stud is part number DJ-1345. The Choke Bracket may come Aluminum or...

    $11.95
    Out of stock
  • 6929 ARC GX340/390 Air Filter Adapter

    6929 ARC GX340/390 Air Filter Adapter

    ARC air filter adapter designed for the GX340/390 stock carburetor used on the stock GX340/390 head. This adapter comes with the air box to carb gasket part number DJ-3314, and 2 M6 x 1 Hex nuts. It does not come with a choke bracket, part number...

    $17.00
    Add to Cart
  • 6931 ARC Custom Air Filter Adapter GX200/Clone

    ARC billet aluminum air filter adapter. This part comes with 2 nuts. It does not come with the choke bracket, part number DJ-1257. If used on a Predator 212, you will need to replace your short carb stud with a standard one part number DJ-1345. This...

    $9.00
    Add to Cart
  • DJ-1251 BSP/Clone GX140 "E" Tube

    This E-tube has a slightly larger main bore and less air bleed holes providing a better fuel signal at the jet. Improves performance across the RPM range, but especially on bottom end and mid range. You will want a main jet between .035" and .037" and...

    $6.00
    Add to Cart
  • DJ-1257 ARC Choke Bracket Assembly

    This little bracket bolts to the back of our 6931 air filter adapter to keep the choke lever in place. Without the stock air box, or this little device, the choke lever will pop off. This bracket requires the odd-shaped, thick, rubber-coated metal...

    $2.50
    Add to Cart