Post Holder for the ARC splined clutch post. Holder may be clamped into vise for ease of clutch maintenance and adjustment.
Billet "Dogbone" syncro counterweight link to be used with Briggs Models 19 and 28.The ARC billet "Dogbone" is manufactured from 6061-T6 aluminum for increased strength and durability over it's OEM counterpart.
Starter Nut for Briggs 5HP Flathead 5/8 x 18 thread pitch 1.375" overall length.
Extended Starter Nut for Metric Animal/Honda GX340/39016 X 1.5mm Thread Pitch and 2.625" overall length.
Hardened billet crank gear for the Briggs 5hp Raptor flathead. 1.005" I.D. 26 tooth.
Hardened steel billet crank gear for the Briggs Animal/Intek 206 stock crankshaft.
This Crank Gear is a must when using an ARC #6580 Crankshaft or a Briggs #555204(495645) Crank.This is the gear to use for the Animal Stroker. 1.005" I.D.
Crank Gear for the Intek 305 Stroker * * ATTENTION * * This gear was designed to be used only with the #6585 or the #6586 ARC Billet Crankshafts. It will not fit the stock crank.
Crank Gear GX200 6.5 OHV Stroker * * *Attention* * * This gear is designed to be used only with the 6572-C Crankshaft * *
ARC Billet Crankshaft 3.06" stroke(stock stroke) for the Briggs Mod 28 flathead Vertical shaft engine. The 6562-C is made from 4340 Hardened Chromoly Steel. It is balanced by design to eliminate the need for Synchro-Balance systems...
GX390 +.200 Stroker Crankshaft. 2.720"(69mm) stroke with standard crank pin diameter. Machined in house from hardened 4340 Chromoly to the exact standard you have come to expect from ARC. Dual plane balanced to eliminate the need for the OEM counter...
Our Stroker Kit for the Honda GX200, BSP, and Clone engines is the basis for building a +.175" stroker. This kit saves you more than $40 off the price of buying these items seperately!!! The kit includes:
ARC 6573-C Billet Chromoly Stroker...