Briggs

6600-FH Briggs Flathead PVL Lite

ARC's new light weight flywheel for the Flathead engine using the Briggs PVL ignition. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified. Must be used with the Briggs PVL coil, see related products...

6617 Billet 5hp Flathead PVL Flywheel

6617 Finned Flywheel with adjustable timing for the Briggs 5hp Flathead engine that allows the use of the Briggs 555681 PVL coil. Coil sold separate.  Flywheel Wt. 3.85 Lbs  Minimum coil gap .030" Torque to 65 ft/lbs

6600-SA Stroker Animal PVL Lite Billet Flywheel

ARC's new light weight Animal stroker flywheel for the Briggs PVL ignition using the Stroker crank. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified. Must be used with the Briggs PVL coil, see related...

6600-A Animal PVL Lite Billet Flywheel

ARC's new light weight Animal flywheel for the Briggs PVL ignition. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified. Must be used with the Briggs PVL coil, see related products. ***Will Not work on...

6610SA- Stroker Animal Flywheel Hub

6611-IV ARC Billet Flywheel, Briggs Intek V-Twin

ARC's SFI certified billet aluminum flywheel for the Briggs and Stratton vertical crankshaft Intek V-Twin models 40 & 44 engine often used in lawnmower racing. The 6611 flywheels are designed as a bolt-on billet aluminum(7-34/lbs) replacement for the...

6624 ARC Billet Flywheel Briggs Model 42 & 46 Opposed Twin Boxer

For the Briggs flathead opposed twin engines models 42 and 46. Like all our billet flywheels, it is SFI certified. It weighs 8 lbs and is stock diameter. Material has been removed from the backside of the flywheel near the rim, reducing rim weight for...

6620 ARC Billet Flywheel, 5HP Flathead, Finned, Non-Adj.

SFI certified billet 6061-T6 aluminum flywheel for the Briggs & Stratton model 13 5HP flathead engine. The keyway is installed to advance the ignition timing to 30° BTDC. The flywheel weighs 4.05 lbs. You can use either the stock pull starter or...

6601 ARC Billet Flywheel, 3HP Diam. Jr. Dragster 2.7LBS

SFI certified billet aluminum 3 hp(5-3/4") diameter flywheel for Jr Dragster engines (no fins). The keyway is installed to advance the ignition timing to 30° BTDC. The flywheel weighs 2.7 lbs and has a super-strong rare earth neodymium...

6603 ARC Billet Flywheel, Adj. 3HP Diam. Jr Dragster 2.90lbs

SFI certified billet aluminum 3 hp diameter flywheel for Jr Dragster engines (no fins). The keyway is in the stock position when the flywheel's indexed adjustable timing hub is set to the negative side of the index range. Index marks are in 2°...

6608 ARC Billet Flywheel B&S Flathead 5hp

Our billet SFI Certified Limited Modified flywheel with adjustable timing for the Briggs & Stratton 5hp flathead "raptor" engine. The keyway is in the stock position when the flywheel's indexed adjustable timing hub is set to the negative...

6611-28 ARC Billet Flywheel, Briggs Mod 28 Flathead

ARC's SFI certified billet aluminum flywheel for the Briggs and Stratton vertical crankshaft Model 28 Flathead engine often used in lawnmower racing. The 6611 flywheels are designed as a bolt-on billet aluminum replacement for the cast-iron stock...