GXC-413-20 5.175" Chromoly Push Rod

*SOLD INDIVIDUALLY*  Shorter Chromoly pushrod for the Honda GX200, Clone 196cc and the Non Hemi (Gen 1&3) Predator 212cc engines to help get the rocker geometry right when decking the head/block or when using small base circle cams...

GXC-413-10 5.260" Chromoly Push Rod

*SOLD INDIVIDUALLY* .187 Diameter chromoly stock length used in Honda GX200, 196cc Clone, 1st and 3rd generation Harbor Freight Predator 212cc engines.

DJ-1055PS PRESET Green Stripe 10.8lb Spring Set 196/212cc

These Box Stock class valve springs have been specially treated to prolong pressure retention. The pressure loss from fatigue is about half of what is seen with untreated springs.  This will allow the engine to run...

DJ-1127-070 Intake Valve 27mm SS 5.5x2.650

Valve head measures 27mm, total length is 2.650" (+/- .004") Top Quality stainless steel with automotive radius type keeper groove. Fits stock 5.5mm valve guide. WILL NOT fit stock retainers. Use ARC # DJ-1047...

GXC-413-00 Chromoly Cut to Length Push Rod ( SOLD INDIVIDUALLY )

 Chromoly Cut to Length Push Rod ( SOLD INDIVIDUALLY )   Max Length is 5.73

DJ-1070CM17 GX200 5.175" Chromoly Push Rod

*SOLD INDIVIDUALLY*  Shorter Chromoly pushrod for the Honda GX200, Clone 196cc and the Non Hemi (Gen 1&3) Predator 212cc engines to help get the rocker geometry right when decking the head/block or when using small base circle cams...

97-WH1 Gage Warhead

DJ-1121-070 SS Intake Valve 25mm +.070 longer

This valve is .070 longer over all lenth is 2.650, head measures  25mm, and it has a radius-type keeper groove. This Valve will not work with stock retainers. Will fit stock 5.5mm valve guides.  Use ARC# DJ-1047 retainers for 22 or...

DJ-1123-150 SS Intake Valve 32mm +.150

 32mm Stainless valve +.150 lenth. The stock valve seat will need to be removed and the seat #6149 must be installed. This valve is top quality and has a radius-type keeper groove. Fits the 5.5mm stock valve guide. Use ARC #DJ-1047 retainers...

DJ-1128-150 SS Exhaust Valve 28mm +.150

High Performance Stainless Steel Valve .150 Longer28mm. Fits the stock 5.5mm guides. WILL NOT fit the stock retainers. Use ARC's part# DJ-1047 retainers for 22/26lb springs or DJ-1046 retainers for 36lb springs.  DJ-1051 lash caps are...

DJ-1121-150 SS Intake Valve 25mm +.150

This valve is .150 longer and head measures  25mm, and it has a radius-type keeper groove. This Valve will not work with stock retainers. Will fit stock 5.5mm valve guides.  Use ARC# DJ-1047 retainers for 22 or 26lb springs, or...

DJ-1046T Titanium Retainer kit 36lb

Titanium retainer kit. Designed to be used with the DJ-1057 36lb Valve Spring. Requires the use of DJ-1051 HP lash caps.  Sold Individually