Search By Engine

ARC Billet Connecting Rods

ARC Billet Connecting Rods for Predator 212, Predator Ghost, Predator 224, GX200, GX390 & Briggs Engines

Upgrade your engine with ARC Racing billet connecting rods engineered for high-RPM durability and racing reliability. Designed for Predator 212 (Hemi & Non-Hemi), Predator Ghost, Predator 224 (Non-Hemi), Honda GX200, GX390, 196cc Clone, Ducar, Tillotson, and select Briggs & Stratton performance engines, ARC billet rods deliver stronger crankshaft support, reduced flex, and increased bottom-end durability compared to stock OEM connecting rods.

Whether you're building a competitive kart racing engine, a Jr. dragster setup, or a high-performance minibike, ARC billet rods are built to handle elevated compression and sustained high-RPM loads with consistent strength and reliability.

Built for High-RPM Strength & Reliability

ARC billet connecting rods are precision-machined from premium high-strength materials and manufactured to exacting tolerances for consistent oil clearance, proper bearing crush, and long-term durability. Designed specifically for high-performance small engine builds, ARC rods maintain structural integrity under sustained high-RPM operation.

Engineered to withstand the extreme stress of competitive kart racing, drag racing, and aggressive performance use, ARC billet rods help prevent rod stretch, cap movement, and catastrophic failure under heavy load conditions.

Why Choose ARC Billet Rods?

  • Proven performance in kart racing and small engine competition under sustained high-RPM conditions.
  • Superior strength compared to cast OEM connecting rods for increased bottom-end durability.
  • Engineered for Predator 212 (Hemi & Non-Hemi), Predator Ghost, Predator 224 (Non-Hemi), GX200/Clone, GX390, Ducar, Tillotson, and select Briggs engines.
  • Precision-machined to exact tolerances for consistent oil clearance and reliable crankshaft support.
  • Trusted by professional engine builders nationwide for race-ready performance builds.

Whether you’re upgrading a stock engine or assembling a full race build, ARC billet connecting rods provide the bottom-end reliability, strength, and performance serious builders demand.

Enjoy fast shipping and expert technical support to help you select the correct rod length, journal size, and configuration for your engine platform.

Frequently Asked Questions – ARC Billet Connecting Rods

What is the advantage of a billet connecting rod?

A billet connecting rod is precision-machined from high-strength aluminum rather than cast. This provides superior durability, improved crankshaft stability, and better resistance to rod stretch under sustained high-RPM racing conditions in performance engines.

Are ARC billet rods stronger than stock OEM rods?

Yes. ARC billet connecting rods are significantly stronger than cast OEM rods and are engineered for high-performance small engine builds where elevated RPM, increased compression, and aggressive racing conditions can cause factory rods to fail.

Which engines are ARC billet connecting rods compatible with?

ARC billet rods are available for Predator 212 (Hemi & Non-Hemi), Predator Ghost, Predator 224 (Non-Hemi), Honda GX160, GX200, GX390, 196cc Clone engines, Ducar, Tillotson, and select Briggs & Stratton racing platforms. Always confirm journal size, rod length, and piston compatibility before ordering.

Do ARC billet rods require special installation?

Proper installation requires accurate torque specifications, correct bearing clearance, and careful measurement of crank journal dimensions. Mechanical experience is recommended for safe and reliable installation in high-performance engine builds.

Will upgrading to a billet rod increase horsepower?

A billet connecting rod does not directly increase horsepower. Its primary benefit is improving bottom-end strength and reliability, allowing your engine to safely operate at higher RPM and support additional performance modifications.

Are ARC rods suitable for competitive kart racing?

Yes. ARC billet connecting rods are widely used in competitive kart racing, Predator Ghost racing, Ducar and Tillotson performance builds, drag racing, and high-performance minibike applications where durability and high-RPM reliability are critical.

  • 6774 Honda GX340/390 4.51" Billet Rod

    6774 Honda GX340/390 4.51" Billet Rod

    (2)

    ARC billet +.100" long connecting rod for the Honda GX390-460cc clone engine. 4.510" center to center for a 1.416" crank pin and a .788" wrist bore. Manufactured from domestic 7075-T651 aluminum and uses 5/16" rod bolts designed and produced by ARP. Also...
    $218.39
    Add to Cart The item has been added
Compare (0)

Shop ARC Racing Billet Connecting Rods

Browse our complete selection of ARC billet connecting rods engineered for Predator 212 (Hemi & Non-Hemi), Predator Ghost, Predator 224 (Non-Hemi), Honda GX200, GX390, 196cc Clone, Ducar, Tillotson, and select Briggs & Stratton racing engines. Designed for high-RPM durability and bottom-end strength, ARC Racing billet rods provide superior crankshaft support and long-term reliability compared to stock OEM rods.

Whether you're building a competitive kart racing engine, drag racing setup, or high-performance minibike, ARC billet connecting rods deliver the strength serious engine builders demand. Enjoy fast shipping and expert technical support to help you select the correct rod length, journal size, and configuration for your engine platform.

!