ARC Billet Sidecovers for Predator 212, GX200 & Briggs Engines

Upgrade your build with ARC billet sidecovers, precision-machined aluminum side covers engineered for strength, durability, and high-RPM performance. Designed for Predator 212, GX200/Clone, Briggs Animal, and other OHV small engines, ARC Racing billet side covers replace weak stock cast covers with rugged 6061-T6 aluminum construction for superior crankshaft support and long-term reliability.

Built for kart racing, minibikes, and performance engine builds, ARC billet sidecovers help reduce crank flex, improve bottom-end stability, and enhance overall engine durability under extreme load conditions.

Engineered for Strength & Reliability

ARC Racing billet sidecovers are manufactured to tight tolerances and often feature:

• Dual crankshaft bearing support

• Camshaft support reinforcement

• Integrated seal bosses

• Oil fill and drain provisions

• Precision-machined surfaces for proper gasket sealing

These design improvements provide better crank alignment and increased structural integrity compared to OEM cast aluminum covers.

Why Choose ARC Billet Side Covers?

• Stronger than stock cast side covers

• Designed for high-RPM small engine applications

• Improves crankshaft stability and bottom-end strength

• Ideal for Predator 212, GX200/Clone, and Briggs builds

• Trusted by competitive kart racers and engine builders

Whether you’re assembling a race-ready engine or reinforcing a performance street build, ARC billet sidecovers provide the durability and precision serious builders demand.

Shop ARC Racing Billet Sidecovers

Browse our full selection of ARC billet side covers, gasket kits, bearings, and hardware to complete your engine build with confidence. Fast shipping and expert technical support available.

ARC Billet Flywheels for Predator 212, GX200 & Racing Small Engines

Upgrade your build with ARC billet flywheels engineered for mini bikes, go karts, Jr dragsters, mower racing, and competitive small engine applications. Designed for Predator 212, Honda GX160/GX200, Clone 196cc, Tillotson, and select Briggs engines, ARC Racing flywheels deliver improved throttle response, reduced rotating mass, proper cooling, and consistent ignition timing at high RPM.

Precision-machined from solid aluminum alloy, ARC billet flywheels are built to withstand the extreme loads of kart racing and high-performance engine builds. Whether you're racing competitively or improving a recreational setup, ARC flywheels provide reliable power and dependable durability under demanding conditions.

Why Choose ARC Billet Flywheels?

ARC Racing is a trusted name in small engine performance. Every ARC billet flywheel is engineered for strength, balance, and timing accuracy to optimize spark delivery and maximize throttle response. With proven track performance and consistent manufacturing standards, ARC flywheels are a smart upgrade for serious racers and performance enthusiasts.

Benefits of Billet Flywheels in Racing

• Improves throttle response and acceleration

• Reduces rotating mass for quicker power delivery

• Withstands higher RPM without flex or failure

• Provides consistent ignition timing for peak efficiency

• Enhances engine cooling under high-speed conditions

Flywheel Compatibility by Engine Type

ARC billet flywheels are available for:

• Predator 212cc (Hemi & Non-Hemi)

• Honda GX160 / GX200

• 196cc Clone Engines

• Tillotson Racing Engines

• Select Briggs & Stratton Models

Correct fitment is essential for safety and performance in kart racing and small engine builds.

How to Choose the Right ARC Flywheel

• Confirm engine model and configuration (Hemi vs Non-Hemi)

• Match timing specs to your ignition setup

• Select based on racing class rules

• Consider flywheel weight for drag or circle track racing

• Choose SFI-certified models when required

• Ensure RPM rating matches your performance goals

Shop ARC Racing Billet Flywheels

Unlock peak small engine performance with ARC Racing billet flywheels. Browse our full selection and find the right flywheel for your Predator, GX200, or Briggs engine build. Fast shipping and expert support available.

ARC Billet Connecting Rods for Predator 212, GX200 & Briggs Engines

Upgrade your engine with ARC Racing billet connecting rods, engineered for Predator 212, GX200/Clone, Briggs & Stratton, and other high-performance small engine builds. Designed for extreme RPM reliability, ARC billet rods provide superior crankshaft support, reduced flex, and increased durability compared to stock OEM rods. Whether you’re building a kart racing engine, drag racing setup, or performance minibike, ARC rods deliver the strength needed to handle elevated compression and high RPM loads.

Built for High-RPM Strength & Reliability

ARC billet connecting rods are precision-machined from premium materials and manufactured to exacting tolerances for consistent oil clearance and long-term durability. These rods are engineered to withstand the extreme stress of racing environments, helping prevent rod stretch and failure under aggressive use.

Why Choose ARC Billet Rods?

• Proven performance in kart racing and small engine competition

• Superior strength over cast OEM rods

• Designed for Predator 212, GX200/Clone, and Briggs engines

• Precision machining for consistent performance

• Trusted by engine builders nationwide

Whether you’re upgrading a stock engine or assembling a full race build, ARC billet connecting rods provide the bottom-end reliability and performance serious builders demand.

Fast shipping and expert technical support available.

Explore high-performance ARC billet cranks and related components designed for strength, precision, and durability in small engine racing and performance builds. ARC Racing billet crankshafts and accessories are engineered to handle increased RPM and load, making them ideal for Predator 212, GX200/Clone, Briggs & Stratton, and other small engine applications. These precision-machined cranks deliver improved balance, reduced vibration, and enhanced power delivery for go-karts, minibikes, and competitive racing. In addition to billet cranks, find related hardware, bearings, and components to complete your build with confidence. Shop ARC Racing for race-ready crank solutions that boost reliability and performance.

ARC Mongrel Clutch Kits for Predator 212, GX200 & Briggs Engines

Upgrade your drivetrain with the ARC Mongrel Clutch, a high-performance clutch system engineered for Predator 212, GX200/Clone, Briggs & Stratton, and other high-RPM small engine builds. Designed for kart racing, minibikes, drag racing, and off-road performance applications, the Mongrel Clutch delivers smooth engagement, dependable torque transfer, and race-ready durability under extreme conditions.

Built to handle aggressive launches and sustained RPM, ARC Racing Mongrel clutches provide stronger engagement and more consistent power delivery than stock clutches.

Engineered for High-RPM Performance

The ARC Mongrel Clutch system is precision-manufactured using high-quality materials to ensure:

• Reliable engagement under load

• Improved acceleration and throttle response

• Increased clutch durability in racing conditions

• Consistent torque transfer for maximum traction

• Reduced slippage compared to OEM clutch systems

Whether you’re building a competitive kart engine or upgrading a performance minibike, the Mongrel Clutch is designed to handle the demands of serious racing.

Why Choose the ARC Mongrel Clutch?

• Designed specifically for high-performance small engines

• Ideal for Predator 212, GX200/Clone, and Briggs applications

• Proven in kart racing and drag racing environments

• Upgrade over stock centrifugal clutch systems

• Backed by ARC Racing quality and engineering

Available options include complete clutch assemblies, replacement shoes, springs, and related clutch hardware to fine-tune engagement characteristics for your setup.

Shop ARC Racing Mongrel Clutch Components

Browse our full selection of ARC Mongrel Clutch kits and accessories to maximize traction, improve launch consistency, and enhance overall drivetrain performance. Fast shipping and expert technical support available.

ARC Hubs, Steering & Chassis Components for Go Karts & Performance Builds

Upgrade your handling with ARC Racing hubs, steering components, and chassis hardware engineered for precision control and durability. Designed for go karts, minibikes, and high-performance builds, ARC hubs and steering parts deliver improved stability, smoother cornering, and responsive control under demanding racing conditions.

From competitive kart racing to serious recreational performance builds, ARC Racing components are built to withstand high loads, aggressive cornering, and track-level stress.

Precision Steering & Chassis Performance

ARC Racing offers a full selection of precision-machined components including:

• Steering hubs

• Spindles

• Tie rods

• Bearings

• Kingpins

• Chassis mounting hardware

Each part is engineered for strength, accurate fitment, and long-term durability to help maintain alignment, improve steering response, and enhance overall chassis performance.

Why Choose ARC Steering & Chassis Components?

• Built for kart racing and performance applications

• Precision-machined for reliable fit and control

• Designed to handle high-speed cornering forces

• Improves stability and driver feedback

• Trusted by racers and engine builders nationwide

Whether you're assembling a race kart chassis or upgrading steering hardware on an existing build, ARC Racing hubs and steering parts provide the control and reliability serious drivers demand.

Shop ARC Racing Hubs & Steering Parts

Browse our full selection of ARC chassis, hubs, and steering components to enhance handling, safety, and performance. Fast shipping and expert support available.

ARC Chain Guards for Go Kart Racing & Small Engine Builds

Protect your drivetrain and improve on-track safety with ARC Racing chain guards, engineered specifically for go kart racing and high-performance small engine applications. Designed for Predator 212, GX200/Clone, Briggs & Stratton, and other kart racing engines, ARC chain guards act as a critical safety component by helping protect drivers from broken or thrown chains while shielding the chain and sprocket from debris and track hazards.

Built for competitive kart environments, ARC chain guards provide reliable containment and durable protection under high-RPM racing conditions.

Engineered for Safety & Drivetrain Protection

A go kart chain guard is an essential safety device in any racing setup. ARC Racing chain guards are designed to:

• Helps protect drivers from serious injury caused by broken or thrown chains during high-speed operation

• Contain chain movement in the event of drivetrain failure

• Shield the chain and sprocket from dirt, debris, and track damage

• Provide added protection to nearby components

• Withstand the stress of high-speed kart racing

Proper chain protection is critical for both driver safety and race compliance.

Designed for Kart Racing Applications

ARC chain guards are built to support small engine kart platforms including:

• Predator 212

• Honda GX160 / GX200

• 196cc Clone Engines

• Select Briggs & Stratton racing engines

Whether you’re assembling a competitive race kart or upgrading an existing chassis, dependable chain protection helps maintain safety and reliability on the track.

Why Choose ARC Racing Chain Guards?

• Built specifically for kart racing environments

• Durable construction for high-stress use

• Designed for secure fit and dependable containment

• Trusted by racers and engine builders

• Backed by ARC Racing performance engineering

Shop ARC Racing Chain Guards

Browse our full selection of ARC chain guards and mounting hardware to protect your kart and race with confidence. Fast shipping and expert support available.

ARC Blower Covers for Predator 212, GX200 & Briggs Engines

Upgrade your engine with ARC Racing blower covers, precision-machined for strength, durability, and performance in small engine racing applications. Designed for Predator 212, GX200/Clone, Briggs & Stratton, and other high-performance builds, ARC blower covers provide dependable protection for your engine’s blower assembly while delivering a clean, race-ready appearance.

Built for kart racing and competitive small engine environments, ARC blower covers combine rugged construction with precise fitment for reliable performance at high RPM.

Engine Protection & Performance Durability

ARC Racing blower covers are engineered to:

• Protect the blower assembly from debris and impact

• Provide added durability in racing conditions

• Maintain proper fit and alignment under high vibration

• Enhance the overall appearance of performance builds

• Withstand high-RPM small engine operation

Manufactured from premium materials and built to tight tolerances, ARC blower covers are designed to perform under the stress of competitive kart racing and high-output engine setups.

Why Choose ARC Racing Blower Covers?

• Designed specifically for small engine performance builds

• Compatible with Predator 212, GX200/Clone, and Briggs engines

• Durable construction for long-term reliability

• Precision-machined for consistent fitment

• Trusted by racers and performance engine builders

Whether you’re finishing a race-ready kart engine or upgrading a performance setup, ARC blower covers provide the protection and durability serious builders expect.

Shop ARC Racing Blower Covers & Accessories

Browse our full selection of ARC blower covers and related hardware to complete your engine build with confidence. Fast shipping and expert support available.

ARC Chain Break Tools for Go Kart & Small Engine Drivetrains

Service your drivetrain with confidence using ARC Racing chain break tools, built for precision, durability, and reliability in kart racing and small engine performance applications. Designed for Predator 212, GX200/Clone, Briggs & Stratton, and other competitive kart platforms, ARC chain break tools make chain removal installation, and drivetrain maintenance faster and more efficient.

Whether you're assembling a race kart or performing routine service, ARC chain break tools provide the strength and accuracy serious builders demand.

Built for Precision & Reliability

ARC Racing chain break tools are engineered to:

• Remove and install links cleanly and efficiently

• Provide controlled force for accurate chain service

• Withstand repeated use in racing environments

• Support common kart chain sizes

• Improve drivetrain maintenance consistency

Precision chain service helps maintain proper drivetrain function and performance in high-RPM kart racing setups.

Why Choose ARC Racing Chain Break Tools?

• Designed for kart racing and small engine applications

• Compatible with Predator 212, GX200, and Briggs builds

• Durable construction for long-term use

• Trusted by racers, mechanics, and engine builders

• Backed by ARC Racing performance engineering

From trackside repairs to full drivetrain assembly, ARC chain break tools help keep your kart race-ready and service-efficient.

Shop ARC Racing Chain Break Tools & Accessories

Browse our full selection of ARC chain break tools and drivetrain hardware to maintain your kart with precision and confidence. Fast shipping and expert support available.

ARC Restrictor Plates for Predator 212, GX200 & Kart Racing Engines

Control airflow and meet class requirements with ARC Racing restrictor plates, engineered for competitive kart racing and small engine performance applications. Designed for Predator 212, GX200/Clone, Briggs & Stratton, and similar racing engines, ARC restrictor plates provide precise airflow limitation while maintaining consistent and reliable performance.

Built for sanctioned racing environments, ARC restrictor plates help ensure compliance without compromising engine durability.

Engineered for Precision Airflow Control

ARC Racing restrictor plates are precision-machined to deliver:

• Accurate airflow restriction for racing class compliance

• Consistent power delivery under controlled conditions

• Reliable fitment for common kart racing platforms

• Durable construction for repeated high-RPM use

• Secure mounting for stable operation

Proper airflow control is critical in many kart racing classes where restrictor plates are required to maintain fair competition.

Designed for Competitive Kart Racing Applications

ARC restrictor plates are compatible with popular small engine platforms including:

• Predator 212

• Honda GX160 / GX200

• 196cc Clone Engines

• Select Briggs & Stratton racing engines

Whether you're preparing for tech inspection or fine-tuning your setup for a regulated class, ARC Racing restrictor plates provide dependable, race-ready airflow management.

Why Choose ARC Racing Restrictor Plates?

• Built specifically for kart racing applications

• Precision-machined for accurate sizing

• Designed for compliance-focused builds

• Durable materials for high-RPM operation

• Trusted by racers and engine builders

Shop ARC Racing Restrictor Plates & Accessories

Browse our full selection of ARC restrictor plates and mounting hardware to keep your engine compliant and competition-ready. Fast shipping and expert support available.

ARC Rod Bolts & Bearings for Predator 212, GX200 & Briggs Engines

Shop high-strength ARC rod bolts and bearings engineered for Predator 212, GX200/Clone, Briggs & Stratton, and other small engine racing builds. Designed for high-RPM performance and extreme loads, ARC Racing rod hardware and precision bearings help strengthen your engine’s bottom end for reliable kart racing and performance applications.

The Importance of High-Quality Rod Bearings

Bearings play a vital role in reducing friction between the crankshaft and connecting rods. Our precision-fit bearings minimize wear, improve oil control, and enhance engine longevity under racing conditions.

Selecting the Right Bearing for Your Engine

Every engine build has unique requirements. We offer application-specific bearing materials and sizes to match different power levels and oil clearances. ARC uses bi-metal bearings individually designed for each engine platform.

Why Choose ARC Racing?

• Proven high-RPM performance

• Precision manufacturing

• Engineered for kart racing and small engine builds

• Expert technical support

• Fast shipping