• DJ-1425 Green Restrictor Plate

    DJ-1425 Green Restrictor Plate

    (2)

     The Restrictor Plate regulations have changed this year. The DJ-1425 is now Green instead of Silver. No other changes in this part. 
    руб1 210,77
    Add to Cart The item has been added
  • GXC-412-00 Ratio Guide Plate

    GXC-412-00 Ratio Guide Plate

    (5)

    Guide Plate for Ratio Rockers used in GX200/Clone/Predator headsRequired for use with 1.2:1 and 1.3:1 Ratio Rockers (Part # DJ-1100, DJ-2102/DJ-2103) ***Will not work in Predator Hemi heads***
    руб852,59
    Add to Cart The item has been added
  • DJ-1100 Stamped Ratio Rocker, 1:3 ( Sold Individually )

    DJ-1100 Stamped Ratio Rocker, 1:3 ( Sold Individually )

    (4)

    Stamped Ratio RockersStamped from high grade steel for added reliability. It has a 1.3:1 ratio increase valve lift by 30% over OEM rockers. For use with stock lift, low/moderate duration cams (not suitable for BP-2, F275, 308 or higher lift/duration...
    руб1 178,49
    Add to Cart The item has been added
  • DJ-2290 Honda Std/Stock Size ZOT Rings

    DJ-2290 Honda Std/Stock Size ZOT Rings

    Honda GX200 High Performance Rings  Standard, stock size for the GX200 OEM # 13010-ZOT-801  Pack includes 2 oil rails and an expander ring, a scraper ring with a lower chamfer on the outside diameter and a chrome-faced compression...
    руб1 513,47
    Add to Cart The item has been added
  • DJ-2292 Honda +.020" Over ZOT Rings

    DJ-2292 Honda +.020" Over ZOT Rings

        OEM Honda    13012-ZOT-801 piston rings are .020" (.50mm) over standard size and can be used with oversized pistons, OR as file-fit rings for standard pistons.  Pack includes 2 oil rails and an expander ring,...
    руб1 513,47
    Add to Cart The item has been added
  • MT-SP1334 Max Torque 13 Tooth Driver Sprocket. #35 Chain X 3/4"

    MT-SP1334 Max Torque 13 Tooth Driver Sprocket. #35 Chain X 3/4"

    Max Torque 13 Tooth Drive Sprocket with Bronze Bushing. These #35 chain steel clutch driver gears are made for 3/4" output shaft. They have an oil-lite bronze bushing installed. Applied a thin coat of gear oil to the bronze bushing before installing on...
    руб1 912,01
    Add to Cart The item has been added
  • 6264 ARC Billet Rod, Mitsubishi/Vanguard 3.465 X .6306

    6264 ARC Billet Rod, Mitsubishi/Vanguard 3.465 X .6306

    Billet Rod  Mitsubishi/Briggs Vanguard 6HP Model 11 engine.  3.465" C/C X .6306 Wrist Pin. Installation Instructions: To install your ARC rod you will need a 12 point 1/4" socket and a QUALITY inch pound torque wrench. You will need an...
    руб8 470,36
    Add to Cart The item has been added