-
6435 Starter Nut Extended Animal/GX390 16 X 1.5
Extended Starter Nut for Metric Animal/Honda GX340/39016 X 1.5mm Thread Pitch and 2.625" overall length. Uses 3/4" socket wrench.Ft6 442 -
6436 Starter Nut Honda/Clone/Yamaha 14-1.5 Stubby
(1)
Starter Nut for Honda / Clone and Yamaha14-1.5mm thread pitch and 1.375" overall length. Uses 3/4" socket wrench.Ft6 442 -
6437 Starter Nut Honda/Clone/Pred/Yamaha 14-1.5 Extended
(3)
14-1.5mm Thread Extended Starter Nut for Honda /196 Clone / Predator 212 and Yamaha. 2.625" overall length. Uses 3/4" socket wrench.Ft6 442 -
6521 ARC Short Heavy Duty Wrist Pin for Wiseco Piston
(4)
Short heavy duty .490 wrist pin for Wiseco pistons. This pin weighs in at 28 grams. Unlike the other heavy duty wrist pin we carry(p/n 6522) this new wrist pin does not need to be cut down to be...Ft10 121 -
6522HD .490 x 2.075 HD Wrist Pin
Heavy Duty .490" Tapered Bore Wrist Pin made from High Strength tool steel.This Pin features a tapered I.D. for increased strength and rigidity. 2.075" long and may require shortening...Ft11 156 -
-
6534 Crank Gear, Animal Stroker
This Crank Gear is a must when using an ARC #6580 Crankshaft or a Briggs #555204(495645) Crank.This is the gear to use for the Animal Stroker. 1.005" I.D.Ft13 995 -
6535 Crank Gear
Crank Gear for the Intek 305 Stroker * * ATTENTION * * This gear was designed to be used only with the #6585 or the #6586 ARC Billet Crankshafts. It...Ft12 149 -
6536 Crank Gear
Crank Gear GX200 6.5 OHV Stroker * * *Attention* * * This gear is designed to be used only with the 6573 Crankshaft * *Ft8 904 -
6554 "Trick" Crank Bearing Mag Side Briggs 5HP Flathead ID .875 OD 2.048 W .500
(1)
Crank Bearing Mag(Flywheel) Side.ID .875" OD .2.048" Width .500"Excellent Quality aftermarket "Trick" ball bearings can be used with a variety of stock 5hp Briggs...Ft4 564 -
6562-C ARC Billet Crankshaft: B&S Model 28 (stock stroke)
(2)
ARC Billet Crankshaft 3.06" stroke(stock stroke) for the Briggs Mod 28 flathead Vertical shaft engine. The 6562-C is made from 4340 Hardened Chromoly Steel. It is balanced by design...Ft209 320 -
6564-C GX390 +.200 Stroker Crankshaft
GX390 +.200 Stroker Crankshaft. 2.720"(69mm) stroke with standard crank pin diameter. Machined in house from hardened 4340 Chromoly to the exact standard you have come to expect from ARC. Dual plane...Ft209 320