-
DJ-2103 Billet Steel 1.3 Ratio Roller Tip Rocker Arm Set
(1)
New and Improved 1.3 Ratio Roller Tip Rockers for the Honda GX200/Clone 196 or Predator 212 NON Hemi. Precision machined from chromoly steel with hardened roller tips and...£5,977.21 As low as $181.81/mo with Learn MoreAdd to Cart The item has been added -
DJ-2172-X Offset Key for Clone/GX200-390
(7)
Offset Flywheel Key for GX200 Thru GX390. This includes most 196cc, through 460cc Honda, clone and Predator engines. *** WILL NOT WORK IN OUR BILLET CRANKS ***£407.72 As low as $12.40/mo with Learn More -
DJ-2224 Pro .615 Blueprinted AKRA/NKA RuiXing Carburetor
(5)
ARC's Pro Series CNC .615 Blueprinted carburetor is set up specifically for the the AKRA/NKA/WKA stock class. The .615 Pro Series carb has been precision bored with the same CNC technology that we...£4,076.68 As low as $124.00/mo with Learn More -
DJ-2225 CNC Bored .615" RuiXing Carb.
(9)
Airflow has been significantly increased by opening the venturi to the max limit of .615 using a CNC machining center - the same technology we use to bore our connecting rods...£3,259.06 As low as $99.13/mo with Learn More -
DJ-2226 .625 BP RuiXing Carburetor for Methanol
This CNC bored .625 carb is designed for the Builders Prepared, Stock Appearing or Outlaw class. Reworked air circuits and a unique E-Tube help regulate the fuel signal to give you that "little...£5,110.12 As low as $155.44/mo with Learn MoreAdd to Cart The item has been added -
DJ-2227 .625" BP RuiXing Carburetor for Gas
(2)
This CNC bored .625 carb is designed for the Builders Prepared, Stock Appearing or Outlaw class. Reworked air circuits and a unique E-Tube help regulate the fuel signal to give you that "little...£5,110.12 As low as $155.44/mo with Learn MoreAdd to Cart The item has been added -
DJ-2229-A CNC Bored .675 Racing Carb for Methanol
Please call to order This CNC bored .675 RuiXing carb is designed for the Stock Appearing or Outlaw class and offers a special built ultra thin throttle shaft and knife edge butterfly that... -
Sold out
DJ-2229-G CNC Bored .675 Racing Carb for Gas
Please call to order This CNC bored .675 RuiXing carb is designed for the Stock Appearing or Outlaw class and offers a special built ultra thin throttle shaft and knife edge butterfly that...£8,151.73 As low as $247.95/mo with Learn More -
DJ-3047 GX390 SS RETAINER SET W/KEEPERS 6.5MM
Aftermarket aluminum retainer and keeper set designed for GX390 aftermarket stainless steel valves(6.5MM VALVE STEM) and heavy duty single or dual springs. Will not work with stock valves or springs.£1,413.44 As low as $42.99/mo with Learn MoreAdd to Cart The item has been added -
DJ-3055DS GX390 Dual Valve Spring Set
(1)
Spring, Valve, Dual, set (Fits 240, 270, 340, & 390s). Approx 65 lbs at 1.125 installed height, 60lbs at 1.2, with 140 lb open pressure (.375 lift). Requires aftermarket retainers and keepers.£869.26 As low as $26.44/mo with Learn MoreAdd to Cart The item has been added -
DJ-3055HD GX390 Heavy Duty Valve Spring (Sold Individually)
(2)
Valve spring single, heavy duty, set (Fits 240, 270, 340, & 390s). Approx 50 lbs at 1.125 installed height, 42lbs at 1.2, with 110 lb open pressure (.375 lift). Honda GX240 through GX390.£326.18 As low as $9.92/mo with Learn MoreAdd to Cart The item has been added -
Sold out
DJ-3070CL Push Rod Honda GX390 Cut To Length(SOLD INDIVIDUALLY)
(3)
*SOLD INDIVIDUALLY* Used in Honda GX390, Predator 420cc engine for setting proper rocker angles after decking the head/block, or when using small base circle cams. After the length has...£869.26 As low as $26.44/mo with Learn More
