3.740" Animal "Long" Rod with bearing inserts.
This rod is designed to give you the most rod length you can get with the stock block and crankshaft by using the shorter compression height Wiseco 1982P140, or a JE EXF4500-140 piston with approximately .090" cut off the top. This piston uses smaller,.490" wrist pin which is a much lighter combination than stock. The increased length lessens the rod angle at half-stroke which decreases stress on the rod and piston to wall pressure. These features provide considerable improvement in durability as well as increased performance.
Rod bolt torque: 170 in/lbs lubricated