800-521-3560
ARC Racing 6617-H billet flywheel designed for Honda GX200 and 196cc clone engines using a PVL digital ignition system. This adjustable timing flywheel provides precise ignition tuning, strong spark energy, and reliable high-RPM performance for competitive kart racing and high-performance engine builds.
The ARC Racing 6617-H billet flywheel is engineered for Honda GX200 and 196cc clone racing engines that use a PVL digital ignition system. Precision-machined from high-strength billet aluminum and SFI certified for racing safety, this flywheel delivers stable ignition timing and durability during sustained high-RPM racing.
The adjustable hub design allows racers to fine-tune ignition timing for different engine combinations and racing conditions. When the hub is set at the first negative index mark with a stock key, the flywheel timing is approximately 25° BTDC. Each additional index mark advances timing in 2° increments, giving engine builders precise control over ignition timing.
Important: This flywheel is designed for use with PVL high-RPM ignition coils such as the 710106 coil and will NOT work with OEM ignition coils.
This flywheel is also not designed for use with a pull starter assembly.
The ARC 6617-H billet flywheel fits Honda GX200 engines and most 196cc clone platforms including Ducar 196/212, Tillotson 196/225/228/236, WildCat 223, Predator Ghost 212, and Predator 224 Non-Hemi engines.
This flywheel is designed for use with PVL digital ignition coils such as the 710106 coil and will not work with OEM ignition coils.
When the adjustable hub is set to the first negative index mark with a stock key, timing is approximately 25° BTDC. Each index mark advances timing by 2 degrees.
ARC Racing recommends tightening the flywheel nut to 65 ft/lbs.
No. The ARC 6617-H flywheel is not designed to work with a stock pull starter assembly.
Complete your racing engine build with ARC Racing billet performance parts including billet connecting rods, billet crankshafts, billet sidecovers, and high-performance flywheels designed for Predator, GX200, and clone kart racing engines.
