-
DJ-1312 BSP/Clone High Performance Head Gasket
(2)
BSP/Clone High Performance Head Gasket This is a Steel, Viton Coated, .010 Head Gasket that meets all AKRA specs for use in the Box Stock classesViton is an extremely...Дин459,63Add to Cart The item has been added -
DJ-1315 Air Box to Carb Gasket
Heavy rubber coated gasket that goes between the air box or air filter adapter and the stock 196cc carburetor.Дин288,91Add to Cart The item has been added -
DJ-1320 Carb to Intake Gasket (For Plate)
(1)
This OEM gasket for the BSP/Clone engine goes between the stock carburetor and the black intake insulator. An extra gasket is needed if a restrictor plate is used. These are good quality and...Дин91,93Add to Cart The item has been added -
DJ-1325 Intake Insulator Gasket
(4)
This is a stock OEM gasket that bridges the gap between the plastic insulator and the head. This gasket is matched in size and shape to the intake port, it has proven to be both uniform in size and...Дин91,93Add to Cart The item has been added -
DJ-1330 BSP/Clone/Hemi Pred Exhaust Header Gasket
(2)
BSP / Clone Exhaust Header GasketStock BSP Product DOES NOT FIT Predator engine without modification. It will fit the Hemi pred.Дин91,93Add to Cart The item has been added -
DJ-1335 BSP / Clone Valve Cover Gasket
(1)
Valve Cover Gasket for the BSP Clone 196cc Engine. Will also fit the newest version Gen3 Predator 212cc engine with 27/25 valves and split keeper retainers. Does NOT fit 2009 Harbor...Дин223,25Add to Cart The item has been added -
DJ-1336 BSP / Clone Rubber Valve Cover Gasket
(2)
Rubber Valve Cover Gasket For The BSP Clone 196cc Engines. Seal better and last longer than the traditional cork gaskets. "May" work on the newest Gen3 Predator 212cc engines with 27/25 valves and...Дин492,46Add to Cart The item has been added -
DJ-1340-12 Gasket, Sidecover Thin .012" GX200/Clone
New, Thinner Sided Cover Gasket for Clone/GX200 Engines .012"Tighten up crank end play or stack with standard gasket to increase crank end play.Дин164,15Add to Cart The item has been added -
DJ-1341 O-Ring, Carburetor Float Bowl GX200/Clone
(2)
This is the stock O-Ring for the float bowl on both the Huayi and RuiXing Clone carbs.Дин190,42Add to Cart The item has been added -
DJ-1345 BSP Carb Stud
Stock carburetor stud for GX200/ Clone. You will need this stud when using an after market air filter adapter on your predator engine, the stock one is too short.Дин232,00Add to Cart The item has been added -
DJ-1350 BSP Header Stud Bolt
(2)
BSP Stock Exhaust Header Stud BoltsДин124,76Add to Cart The item has been added -
Sold out
DJ-1360 Clone/GX200 Oil Filler Plug, 20mm
BSP Oil Fill Cap for Clones / GX20020mm X 2.5 Thread Check your size when orderingДин218,87
