-
DJ-1280-10 Stock Connecting Rod, Clone/GX200 +.010
Clone/GX200 3.313" long stock rod. This is a stock, cast rod that is +.010" over stock length. If the top of the piston is .015" or more down in the bore from the cylinder's gasket surface when the...CFA8 810,85Add to Cart The item has been added -
2100B 3/16 x 1/8 MPT Compression Fitting
For use with the ARC top platesCFA1 700,94Add to Cart The item has been added -
224-1180 Starter Cup Ducar 224/Pred 224
Replacement Starter Cup for Ducar 224 / Pred 224. Approximately 2-1/2" overall length.CFA3 401,87Add to Cart The item has been added -
6899 Angled Air Filter
(5)
The standard angled air filter used in most 4 cycle karting engines. 3-1/2" x 4" with a 20 degree angle. The inside diameter of the mounting flange is 2-7/16". Most OHV kart engines will require an...CFA7 477,31Add to Cart The item has been added -
6926 Air Filter Adapter Clone/GX200
(4)
Our economy air filter adapter. Made to fit Honda/Clone Gx200, and Predator engines. If used on a Predator, you will need to replace your short carb stud with a standard one. Carb stud is part number...CFA9 491,22Add to Cart The item has been added -
DJ-0215 OHV 212CC 55MM(2.165") Crankshaft
(2)
OHV 212CC 55MM (2.165") crank shaft. This crank will give you around .040" more stroke than a standard Honda GX200/Clone 196cc crank shaft (2.125"). Uses the Honda/Clone connecting rods and...CFA25 718,14Add to Cart The item has been added -
DJ-0216 OHV 212cc 25mm Ex Valve
OHV 212cc 25mm Ex Valve (HF Predator Hemi OEM replacement) 5.5mm valve stem. Average total valve length 2.447"CFA5 545,05Add to Cart The item has been added -
DJ-0217 OHV 212cc 27mm Intake Valve
OHV 212cc 27mm Intake Valve (HF Predator Hemi OEM replacement) with 5.5mm valve stem. Average total valve length 2.508"CFA5 545,05Add to Cart The item has been added -
DJ-1001 Ducar 196cc OHV Engine has no cam installed in the engine
(1)
Ducar 196cc has no cam installed in the engine Choose the package above that best suits you! Features Cast Iron Cylinder Sleeve Dual Ball Bearing Block JT Cast Head Ruixing Carb Electronic...CFA145 191,85 -
DJ-1040 BSP Intake Valve Spring Retainer
BSP Intake Valve Spring Retainer for GX200 / Clone engines; Standard StockCFA1 973,09Add to Cart The item has been added -
DJ-1040UL Intake Spring Ultralite Retainer
Intake Spring Ultralite Retainer. NOT RECOMMENDED FOR SPRINGS OVER 10.8LBSCFA2 891,59Add to Cart The item has been added -
DJ-1045 Retainer, Exhaust Spring 196CC
Stock OEM valve retainer for the 196cc engine. You must have a lash cap DJ-1050 with this retainer.CFA1 973,09Add to Cart The item has been added
