Categories - Page 37

DJ-1100 Stamped Ratio Rocker, 1:3 ( Sold Individually )

(4)

Stamped Ratio RockersStamped from high grade steel for added reliability. It has a 1.3:1 ratio increase valve lift by 30% over OEM rockers. For use with stock lift, low/moderate duration cams (not suitable for BP-2, F275, 308 or higher lift/duration...

zł47,01

Add to Cart The item has been added

Compare
DJ-2290 Honda Std/Stock Size ZOT Rings

Honda GX200 High Performance Rings Standard, stock size for the GX200 OEM # 13010-ZOT-801 Pack includes 2 oil rails and an expander ring, a scraper ring with a lower chamfer on the outside diameter and a chrome-faced compression...

zł60,37

Add to Cart The item has been added

Compare
DJ-2292 Honda +.020" Over ZOT Rings

OEM Honda 13012-ZOT-801 piston rings are .020" (.50mm) over standard size and can be used with oversized pistons, OR as file-fit rings for standard pistons. Pack includes 2 oil rails and an expander ring,...

zł60,37

Add to Cart The item has been added

Compare
MT-SP1334 Max Torque 13 Tooth Driver Sprocket. #35 Chain X 3/4"

Max Torque 13 Tooth Drive Sprocket with Bronze Bushing. These #35 chain steel clutch driver gears are made for 3/4" output shaft. They have an oil-lite bronze bushing installed. Applied a thin coat of gear oil to the bronze bushing before installing on...

zł76,27

Add to Cart The item has been added

Compare
6264 ARC Billet Rod, Mitsubishi/Vanguard 3.465 X .6306

Billet Rod Mitsubishi/Briggs Vanguard 6HP Model 11 engine. 3.465" C/C X .6306 Wrist Pin. Installation Instructions: To install your ARC rod you will need a 12 point 1/4" socket and a QUALITY inch pound torque wrench. You will need an...

zł337,87

Add to Cart The item has been added

Compare
6268 ARC Billet Rod Honda GX200 Clone 196CC 3.707" X 1.183" X .490"

(1)

The new ARC Racing billet "Long" rod for the Honda GX200/Clone 196cc engines. This rod measures 3.707" center to center for a 1.180" crank pin with .490" wrist pin and is designed to be used with aftermarket high-performance pistons. For...

zł362,01

Add to Cart The item has been added

Compare
6295 Rod Bearing, Briggs Boxer

Rod Bearing Briggs Boxer

zł120,70

Add to Cart The item has been added

Compare
6397 Rod Bearings

Rod BearingIntek 305/Vert Model 28

zł96,59

Add to Cart The item has been added

Compare
6398 Rod Bearings

Rod Bearing for .875" Stroker crankshaft.

zł66,41

Add to Cart The item has been added

Compare
6291 Rod Bearings, Tecumseh Formula

Rod BearingTecumseh Formula

zł80,49

Add to Cart The item has been added

Compare
6390 Rod Bearing, Briggs Vanguard

(1)

Rod Bearing for the Briggs Vanguard Model 30, 35, and 38 vertical shaft engine.

zł96,59

Add to Cart The item has been added

Compare
6391 Rod Bearing Honda GX390

Rod Bearing for the Honda GX340/390 OHV.

zł88,54

Add to Cart The item has been added

Compare