Categories - Page 37

GXC-412-00 Ratio Guide Plate

(5)

Guide Plate for Ratio Rockers used in GX200/Clone/Predator headsRequired for use with 1.2:1 and 1.3:1 Ratio Rockers (Part # DJ-1100, DJ-2102/DJ-2103) ***Will not work in Predator Hemi heads***

﷼33.84

Add to Cart The item has been added

Compare
DJ-1100 Stamped Ratio Rocker, 1:3 ( Sold Individually )

(4)

Stamped Ratio RockersStamped from high grade steel for added reliability. It has a 1.3:1 ratio increase valve lift by 30% over OEM rockers. For use with stock lift, low/moderate duration cams (not suitable for BP-2, F275, 308 or higher lift/duration...

﷼46.77

Add to Cart The item has been added

Compare
DJ-2290 Honda Std/Stock Size ZOT Rings

Honda GX200 High Performance Rings Standard, stock size for the GX200 OEM # 13010-ZOT-801 Pack includes 2 oil rails and an expander ring, a scraper ring with a lower chamfer on the outside diameter and a chrome-faced compression...

﷼60.07

Add to Cart The item has been added

Compare
DJ-2292 Honda +.020" Over ZOT Rings

OEM Honda 13012-ZOT-801 piston rings are .020" (.50mm) over standard size and can be used with oversized pistons, OR as file-fit rings for standard pistons. Pack includes 2 oil rails and an expander ring,...

﷼60.07

Add to Cart The item has been added

Compare
MT-SP1334 Max Torque 13 Tooth Driver Sprocket. #35 Chain X 3/4"

Max Torque 13 Tooth Drive Sprocket with Bronze Bushing. These #35 chain steel clutch driver gears are made for 3/4" output shaft. They have an oil-lite bronze bushing installed. Applied a thin coat of gear oil to the bronze bushing before installing on...

﷼75.89

Add to Cart The item has been added

Compare
6264 ARC Billet Rod, Mitsubishi/Vanguard 3.465 X .6306

Billet Rod Mitsubishi/Briggs Vanguard 6HP Model 11 engine. 3.465" C/C X .6306 Wrist Pin. Installation Instructions: To install your ARC rod you will need a 12 point 1/4" socket and a QUALITY inch pound torque wrench. You will need an...

﷼336.19

Add to Cart The item has been added

Compare
6268 ARC Billet Rod Honda GX200 Clone 196CC 3.707" X 1.183" X .490"

(1)

The new ARC Racing billet "Long" rod for the Honda GX200/Clone 196cc engines. This rod measures 3.707" center to center for a 1.180" crank pin with .490" wrist pin and is designed to be used with aftermarket high-performance pistons. For...

﷼360.22

Add to Cart The item has been added

Compare
6295 Rod Bearing, Briggs Boxer

Rod Bearing Briggs Boxer

﷼120.10

Add to Cart The item has been added

Compare
6397 Rod Bearings

Rod BearingIntek 305/Vert Model 28

﷼96.11

Add to Cart The item has been added

Compare
6398 Rod Bearings

Rod Bearing for .875" Stroker crankshaft.

﷼66.08

Add to Cart The item has been added

Compare
6291 Rod Bearings, Tecumseh Formula

Rod BearingTecumseh Formula

﷼80.09

Add to Cart The item has been added

Compare
6390 Rod Bearing, Briggs Vanguard

(1)

Rod Bearing for the Briggs Vanguard Model 30, 35, and 38 vertical shaft engine.

﷼96.11

Add to Cart The item has been added

Compare