Welded and heat treated Dyno Cam for the Gen 1 & 3 Harbor Freight 212cc Predator engine. The 308 cam is easy on the valve train and has a very wide power band. This cam requires an upgraded valve package, billet rod, and billet flywheel. When using OEM Non Hemi rockers arms, we recommend using the DJ-1070CM16 push rods. These push rods are shorter and will drop the rocker angle down on the push rod side and allow the rocker to achieve full lift.
This cam WILL NOT fit the "Hemi" 212cc Predator, GX200, Clone 196cc, Ducar 212cc or Tillotson 212cc. Identify your engine before ordering.
Engine: 212cc OHV Predator
Target (MAX) RPM: 8200-8400
Spring Pressure (In / Ex): 32 lbs
Valve Lash (IN/EX): .003"
Ignition Timing: 34 Deg BTDC
Dur @ .050": 244.2 Deg.
C/L: 108 ATDC
DUR @ .050": 2446 Deg.
C/L: 108 BTDC
1 Review Hide Reviews Show Reviews
Lots of power and good power band range.