ARC's new light weight Predator Hemi 212cc flywheel for the Briggs PVL ignition. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified. Includes required coil bracket. Will work with OEM pull starter or handheld electric starter. Must be used with the Briggs PVL coil, see related products.
***Will Not work on Non Hemi Predator or Honda/Clone cranks***
Minimum .030 coil gap.
Flywheel is set at 29 degrees with stock key.
This Flywheel should be lapped in lightly for a few seconds with valve lapping compound (see video)
Torque to 54 Ft/lbs. Do NOT exceed 54 FT lbs. This can damage your flywheel!
1 Review Hide Reviews Show Reviews
Running this flywheel on a built minibike on a hemi with a arc 1.75lb flywheel, PVL coil, ARC rod and sidecover with a dover performance camshaft and a 24mm mikuni. It pulls out of the hole harder than any bike ive ridden. Running 112 Sunoco octane works great. Id recommended the regular 3.5lb flywheel if your running a centrifugal or torque converter. But it does work well with the clone fan setup it runs in the normal operating range. Havent gotten it too hot yet.